Selected region:
World
Click to change
Making holes in stuff
A hand tool, power tool, or machine with a rotating cutting tip used for making holes.
The Terratek 18V/20V Lithium-Ion Cordless Drill Set is supplied with a powerful Li-ion battery which results in having no memory effect, no self-discharge and always ready for use. Peaking at 20V from a fresh charge the battery stabilises to 18V.
Equipped with a variable speed pressure trigger which can take your cordless drill up to a no load speed of 650rpm and both forward and reverse levers that enable the drill to quickly switch between drilling and withdrawing of screws.
Welcome to the website guide of the Eket V2 build video guide.
With two separate chambers this build can do continuous supply in a very small package.
This guide is done with a small and a big eket, but you could do it with two large ones to allow longer vegging, in this case you can do the second eket for vegging with just 2 panels instead of 4.
The normal power usage for this build is below 50w total, which means less than $5/month for veg (4€) and $3/month in bloom (3€).
The new cardboard compression chamber of the blower allows for a quieter build and makes the carbon filter setup much simpler.
(The attachements below are also downloadable throughout the guide)
Selected region:
World
Click to change
Roughing up a surface for better adhesiveness
So anyway, I started blasting
Making holes in stuff
SGL's favorite tape!