Welcome to the website guide of the Eket V2 build video guide.
With two separate chambers this build can do continuous supply in a very small package.
This guide is done with a small and a big eket, but you could do it with two large ones to allow longer vegging, in this case you can do the second eket for vegging with just 2 panels instead of 4.
The normal power usage for this build is below 50w total, which means less than $5/month for veg (4€) and $3/month in bloom (3€).
The new cardboard compression chamber of the blower allows for a quieter build and makes the carbon filter setup much simpler.
(The attachements below are also downloadable throughout the guide)
Last step of this build, we'll plug the veg box led panel, ventilation and sensor to the controller.
The controller can manage up to three boxes simultaneously, the setup of the second box is done simply thanks to the app.
Click to change
Note which LED port you plug the veg box light in; you should have port 5 and 6 available.
Blower goes in M2.
Sensor goes in port A2.
Towelie, your personal grow assistant will guide you through the steps.
Start by adding a new plant.
Plants are then assigned to a Lab.
The lab is the name of your box.
Labs are assigned to controllers.
You should have 2 available LED channels, select the one corresponding to the port# you plugged the light in.
Germination is the first step when starting from seed :)
This guide will teach you how to successfuly germinate your seeds with a battle tested method; the shot glass.